ADAPTEC AHA-2940 BIOS ingyenes letöltés (ver. 1.­23)

AHA-2940 with Autoterm BIOS,­ version 1.­23 (Checksum ="EC00").­ The original production release of the AHA-2940/­AHA-2940W was introduced in April 1994.­ Host Adapter BIOS ver 1.­0 BIOS v 1.­1 BIOS v 1.­16 AHA-2940 S6 AHA-2940W S6 n/­a n/­a CS=6E00 AHA-2940 AHA-2940W CS=7000 CS=8200 CS=6E00 PCI host adapters were revised in August 1995 to incorporate Autotermination.­ The first release was BIOS 1.­20.­ These were superseded with the introduction of the AHA-2940UW.­ Host Adapter BIOS ver 1.­20 BIOS ver 1.­21 BIOS ver 1.­23 AHA-2940S76 CS=EC00 AHA-2940S76 CS=9A00 CS=2800 CS=D400 AHA-2940 w/­Autoterm CS=1800 CS=CE00 CS=EC00 In March 1996,­ the internal ID of the board was changed.­ This required a change in the BIOS code.­ In order to process a request for a BIOS upgrade EPROM for the above assemblies,­ it is necessary to provide us with the checksum (CS) from the label on the installed EPROM chip.­ If requesting a BIOS upgrade,­ contact us via ASK Us and provide a mailing address.­ Requirements: This file is a Hex code file which requires an EPROM programmer.­ Notes: The following file is Hex code which requires an EPROM programmer.­ If you do not have a EPROM programmer and require a BIOS upgrade,­contact Tech Support via ASK Us.­You will need to provide a mailing address and current BIOS version/­checksum.­ Note: This is the BIOS Hex code (Intel Hex format) for the EPROM based standard AHA-2940 boards.­ Using this file,­ you may use an EPROM programmer to program a new BIOS chip.­ This BIOS will only work with standard AHA-2940 with Autoterm boards with a previous checksum of either "1800" (Version 1.­20) or "CE00" (Version 1.­21).­